Atag VA6611RT Use & Care Manual page 26

Settings
Setting a signal
If you want the machine to signal when the wash is complete, you can program it to do this. The
machine is set without a signal by default.
PROG PROG
START
STOP
PROG PROG
START
STOP

1. Switch off the dishwasher at the main switch.
2. Hold in the Delayed start button at the same time as you press the
main switch. The button flashes. Release the button.
3. Press the Program button – when the
signal is activated.
4. Press the Start/Stop button and the setting will be stored until next
time you want to make a change.
or Reset
1. Switch off the dishwasher with the main switch.
2. Hold in the Delayed start button at the same time as you press the
main switch. The button flashes. Release the button.
3. Press the Program button – when the
signal is deactivated.
4. Press the Start/Stop button and the setting will be stored until next
time you want to make a change.
Auto wash symbol lights, the
Auto wash symbol goes out, the