Atag VA6611RT Use & Care Manual page 27

Settings
Super rinse
Super rinse means that two extra rinses will be addes at the end of the main dish. Cannot be used in
the Quick wash and Rinse & Hold programs.
+
PROG PROG
START
STOP
or Reset:
+
PROG PROG
START
STOP
1. Switch off the dishwasher with the main switch.
2. Hold in the Time server button while pressing the main switch.
The Time server button and Start will flash. Release the Time
server button.
3. Press the Program button– when the Auto wash symbol is lit, the
Super rinse has been activated
4. Then press the Start/Stop button to store the setting.
1. Switch off the dishwasher with the main switch.
2. Hold in the Time server button at the same time as pressing
the main switch.
3. Press the Program button – when the Auto wash symbol goes out
the Super rinse has been deactivated.
4. Then press the Start/Stop button to confirm the setting.