Fitting the dishwasher in place
7. Check that there is a space of 3 mm between
the top of the dishwasher door and the under
side of the worktop.
Do not attach the
done later.
8. Adjust the back foot by turning the adjustment
screw at the front clockwise.
10. Place the spirit level on the dishwasher door
to check that the machine is level and adjust if
necessary. The door must be fully closed!
Note:
The dishwasher must be level!
An unlevel machine can affect the amount of wa
ter taken in, the door can be difficult to close, and
the baskets difficult to place securely.
locking nuts.
This will be
3 mm