Table of Contents
Advertisement
◎ Printer transportation
The following cautions are necessary in transportation of the printer. Since an incorrect
transportation method causes a printer fault, please follow the correct method.
1. Remove the ribbon and paper from the printer before transporting the printer. If the
ribbon or paper cannot be removed due to a fault, consult with the HiTi dealers or
service center.
4.6 Loading ribbon
◆ Attention: It is a mistake-proofing for users;
Make sure the notch of ribbon's take and
supply side has be combined with the pin of
gear on printer.
4.7 Closing front cover and 4 sheets of paper will be
cut without printing automatically to ensure the
paper quality.
4.8 Loading scrap receptacle:
Clean it up periodically before full of scraps
15
Advertisement
Table of Contents
