Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HiTi Digital P520L
Summary of Contents for HiTi Digital P520L
- Page 1 P520L PC-Link Dye-Sub Printer User Manual...
-
Page 2: Table Of Contents
Contents Regulatory compliance statements................... 3 Chapter 1. Important safety instruction ................5 Safety Instruction ..................5 ◎ Environments ....................5 ◎ Handling Instruction ..................6 ◎ Handling Instruction for Consumable and Printed Outputs ..... 8 ◎ Chapter 2. Accessory items ....................9 Accessory Item .................... -
Page 3: Regulatory Compliance Statements
Regulatory compliance statements American Users FCC Part 15 For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual. This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. - Page 4 Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may...
-
Page 5: Chapter 1. Important Safety Instruction
Chapter 1. Important safety instruction ◎ Safety Instruction This manual provides detail instructions for the safety use of the printer. Please read this manual carefully before operating the printer to ensure having proper use. ◆ In this manual, there are notes that require special attention. For your safety operation, Safety Notices are separated as follows: : Inappropriate handing can cause the death or serious wounds. -
Page 6: Handling Instruction
: Do not place the printer under a humid or dusty place. It can cause a fire, electric shock or printer problem. Do not place the printer with dust, sand and high humidity such as bathing place, bathroom, hot spring or the street. : Do not place the printer on rickety place and/or inclined place. - Page 7 : When moving the printer, hold the bottom edge of the printer. It is strongly recommended to handle the printer by one to two persons during the transportation. : Please take caution when transporting the printer on the slippery floor. : Please make sure the power is off and the power cord is removed from the printer before transportation.
-
Page 8: Handling Instruction For Consumable And Printed Outputs
: This product must be grounded at all time during operation, and always used with the specified power cable only or the power cable accompanying this product. If the product is used without grounding, and current leakage occurs, fire or electrical shock may occur, and may also cause interference to radio, TV, and other similar electric appliances signal receiving. -
Page 9: Chapter 2. Accessory Items
Chapter 2. Accessory items Before using the printer, please make sure the Chapter 1. Important Safety Instruction is fully-acknowledged carefully. ◎ Accessory Item => Paper flange x 2 (1x Black and 1x white) => Paper adapter x 2 (Install with Paper flange) =>... - Page 10 => USB cable => Warranty card...
-
Page 11: Chapter 3. Basic Functions Introduction
Chapter 3. Basic functions introduction ◎ Appearance ❶ ❷ ❸... -
Page 12: Lcd Display
❹ ❺ ❻ ❼ ❽ ◎ LCD Display Name Function Door Press the button to open the front door ❶ Control panel Four hard-key and one mono LCM to control and ❷ monitor the condition of the printer Scrap receptacle Clean it up periodically before full of scraps in the ❸... - Page 13 (Type B) purpose Power Switch Switch “On” to operate, and switch “Off” when ❻ finishing using the printer. Do not switch off the printer while the printer is still running. Power slot To be connected with AC power (110V~240V) ❼ Paper sensor Place the paper core properly and stretch the paper to ❽...
-
Page 14: Chapter 4. Installing And Operation
Connect the power cord which is conformed to safety regulations below. ◎ Installing 4.1 Connect the printer power cord to the back of P520L (as figure shown) and AC power receptacle. : Make sure to switch off the power of the printer before connecting to AC power. -
Page 15: Operation Process
: Please avoid piling up which may cause the fire and electric shock. Connect the USB cable with printer and PC/laptop for further operation. 4.2 Connect USB cable with printer and PC/laptop. USB A type for PC/laptop ; USB B type for printer. : Before removing the USB cable, please make sure the printer is finished its internal operations. -
Page 16: Ribbon/Paper Installing
4.4 Open the cover of the printer Press the button on the top left of front cover of the printer. ＊ Attention: Reserve a space for the cover jump out ◎ Ribbon/Paper Installing Install paper adapters in the paper flange first while using 5x7 paper size. However, the paper adapters are not necessary while printing 4x6 or 6x8 paper size. - Page 17 4.5.1 Loading paper instructions Place the paper flange in right positions. ＊ Attention: Installing the print kit to the printer can be hassle-free. Please read the manual carefully before working on the printing.. *Accessory item: => Paper flange x 2 (1x Black and 1x white) 4.5.2 Stretch the paper to designated position Stretch proper length of paper through the gap and make sure the black object (as red circled...
-
Page 18: Printer Transportation
4.6 Loading ribbon instructions Stretch the ribbon and load in right position. ＊ Attention: It is a mistake-proofing for users; Please be sure the white head locates on white indentation and black head locates on black indentation. 4.7 Close front cover When the ribbon and paper are finished loading, please close the door to ensure printer running properly. -
Page 19: Chapter 5. Operation Panel And Printer Status
Chapter 5. Operation panel and Printer Status ◎ Operation Panel ⓭ ❾ ❿ ⓫ ⓬ Name Function Left button Use this button to select preferred setting ❾ Manu button Use this button to view the printer status ❿ Right button Use this button to select preferred setting ⓫... -
Page 20: User Set Up Mode
PRINTER CUTTING Left/Right button and will cut 4 sheets <AUTO> when select to this mode Change language by press Left/Right LANGUAGE SELECTION button <ENGLISH> FW VERSION Display the version of the printer HiTi P520L V. 1.2.3.4. Chapter 6. Routine Maintenance... -
Page 21: Cleaning Of Thermal Printing Head And Roller
◎ Cleaning of Thermal Printing Head and Roller By using thermal transfer technology, daily maintenance is not necessary if the printer has been using properly. However, in order to keep the best print quality, it is highly recommended to clean Thermal Printing Head and Roller once a month. -
Page 22: Cleaning Of Outer Cabinet Cleaning
：Please wait 5 minutes until the gauze dried up completely ◎ Cleaning of Outer Cabinet cleaning Wipe the printer with a soft cloth. If the strains are not removed, wet the cloth and apply weakened neutral Detergent to it. : In case of foreign substance get into the printer, please switch off the printer, remove the power cord and contact with dealers or service center for further help. -
Page 23: Chapter 7. Error Message Handling
Chapter 7. Error Message Handling ◎ Error Message and Corrective Actions LCD Message Status Corrective Action 0100 Cover Open The front cover is opened Close the front cover 0101 Cover Open fail The front cover is not Press the button again ❶... -
Page 24: Paper Jam Resolution
lamp us lit The front cover does not open Check if the printer is installed in a flat ● surface Please check if there is hindrance for ● opening the front door A straight stripe area is not The Thermal Printing Head may be dirty, ●... -
Page 25: Power Supply Interrupted During Printing
Pull out the paper until the paper sensor indicator goes off. ＊ Attention: If the paper is used without cutting off the folded or printer section, paper jam occurs every time or the ribbon may snap during printing. Always cut off the creased or printed section of the paper. -
Page 26: Chapter 8. Specification
Stick the broken part of ribbon with a tape. Turn the ribbon on the rewinding side and rewind the tapped section completely and tightly. Chapter 8. Specification... -
Page 27: Specification
◎ Specification Model Name HiTi P520L Printing Method Dye Diffusion Thermal Transfer (D2T2 Technology) Resolution 300 x 300 dpi Printing Size & Capacity 4” x 6” (102 x 152mm): 500 prints 5” x 7” (127 x 177mm): 290 prints 6” x 8” (152 x 203mm): 250 Prints Printing speed 4”...