H3C IE4300 Series Command Reference Manual page 12

MAD LACP enabled interface: Bridge-Aggregation 1
MAD status
Member ID Port
1 GigabitEthernet1/0/5
2 GigabitEthernet2/0/5
MAD BFD enabled interface: VLAN-interface 3
MAD status
Member ID MAD IP address
1 192.168.1.1/24
2 192.168.1.2/24
Table 5 Command output
Field
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled.
MAD BFD enabled.
Multi-active recovery state
Excluded ports
(user-configured)
Excluded ports
(system-configured)
MAD ARP enabled
interface:
MAD ND enabled
interface:
MAD LACP enabled
interface
MAD status
: Normal
: Normal
Neighbor
2
1
Description
Status of ARP MAD.
This field displays MAD ARP enabled if ARP MAD is enabled.
Status of ND MAD.
This field displays MAD ND enabled if ND MAD is enabled.
Status of LACP MAD.
This field displays MAD LACP disabled if LACP MAD is disabled.
Status of BFD MAD.
This field displays MAD BFD disabled if BFD MAD is disabled.
Whether the IRF fabric is in Recovery state:
•
Yes—The IRF fabric is in Recovery state. When MAD detects that an
IRF fabric has split into multiple IRF fabrics, it allows one fabric to
forward traffic. All the other IRF fabrics are set to the Recovery state. In
Recovery state, MAD shuts down all common network interfaces in the
fabric except for the system- and user-excluded network interfaces.
•
No—The IRF fabric is not in Recovery state. It is active and can forward
traffic.
Network interfaces manually configured to not shut down when the IRF fabric
transits to the Recovery state.
Network interfaces set to not shut down by the system when the IRF fabric
transits to the Recovery state. These interfaces are not manually configured.
•
IRF physical interfaces.
•
BFD MAD interfaces:
VLAN interfaces used for BFD MAD and the Layer 2 Ethernet ports in
the VLANs.
Management Ethernet ports used for BFD MAD.
•
Member interfaces of a Layer 2 aggregate interface if the aggregate
interface is excluded from the MAD shutdown action.
Interfaces on which ARP MAD is enabled.
This field displays MAD ARP disabled if ARP MAD is disabled.
Interfaces on which ND MAD is enabled.
This field displays MAD ND disabled if ND MAD is disabled.
Interface on which LACP MAD is enabled. This field is displayed for each
interface enabled with LACP MAD.
This field displays MAD LACP disabled if LACP MAD is disabled.
LACP MAD operating status:
6
MAD status
Normal
Normal
MAD status
Normal
Normal