Easy-Irf - H3C IE4300 Series Command Reference Manual

Field
Member ID
Port
MAD status
MAD BFD enabled
interface:
MAD status
Member ID
MAD IP address
Neighbor
MAD status

easy-irf

Use easy-irf to bulk-configure basic IRF settings for an IRF member device.
Syntax
easy-irf [ member member-id [ renumber new-member-id ] domain domain-id
[ priority priority ] [ irf-port1 interface-list1 ] [ irf-port2
interface-list2 ] ]
Views
System view
Predefined user roles
network-admin
Parameters
member member-id : Specifies the member ID of a member device. The value range for the
member ID is 1 to 10.
Description
•
Normal—LACP MAD is operating correctly.
•
Faulty—LACP MAD is not operating correctly. Verify the following items:
Verify that the ports on LACP MAD links are up.
Verify that the intermediate device supports extended LACPDUs.
Verify that all member devices have member ports used for LACP
MAD.
LACP MAD details:
•
Member ID—IRF member ID of a device.
•
Port—Member ports of the aggregate interface used for LACP MAD.
•
MAD status—LACP MAD operating state on a member port. Values
include Normal and Faulty.
Layer 3 interface on which BFD MAD is enabled.
This field displays MAD BFD disabled if BFD MAD is disabled.
BFD MAD operating status:
•
Normal—BFD MAD is operating correctly.
•
Faulty—BFD MAD is not operating correctly. Check the BFD MAD link
for connectivity issues.
•
N/A—BFD MAD link status cannot be detected. If BFD MAD is enabled
on a management Ethernet port, it is normal that this field displays N/A.
BFD MAD details:
•
Member ID—IRF member ID of the local device.
•
MAD IP address—MAD IP address of a member device.
•
Neighbor—IRF member ID of the neighboring member device.
•
MAD status—BFD MAD link state. The following values are available:
Normal—BFD MAD is operating correctly.
Faulty—BFD MAD is not operating correctly. Check the BFD MAD
link for connectivity issues.
N/A—BFD MAD link status cannot be detected. If BFD MAD is
enabled on a management Ethernet port, it is normal that this field
displays N/A.
7