Display Mad - H3C IE4300 Series Command Reference Manual

Related commands
display irf
display irf configuration

display mad

Use display mad to display MAD status and settings.
Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose : Displays detailed MAD information. If you do not specify this keyword, the command only
displays whether a MAD mechanism is enabled or disabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled.
MAD BFD enabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Multi-active recovery state: No
Excluded ports (user-configured):
Bridge-Aggregation4
Vlan-interface999
Excluded ports (system-configured):
IRF physical interfaces:
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet2/0/1
GigabitEthernet2/0/2
BFD MAD interfaces:
GigabitEthernet1/0/3
GigabitEthernet2/0/3
Vlan-interface3
Member interfaces of excluded interface Bridge-Aggregation 4:
GigabitEthernet1/0/4
GigabitEthernet2/0/4
MAD ARP disabled.
MAD ND disabled.
5