TP-Link Archer VR2800 User Manual page 117

6 ) Click OK.
• For Windows 7/8/8.1/10:
1 ) Right-click the Network icon on the system tray and select
Sharing Center
2 ) Right-click your network connection (wired or wireless) and select Properties.
3 ) Double-click
4 ) Select both
automatically, then click OK.
5 ) Click OK again to save your configuration.
• For Windows XP:
1 ) Right-click the Network icon on the system tray and select
Connections.
2 ) Right-click your network connection (wired or wireless) and select Properties.
3 ) Double-click
4 ) Select both
automatically, then click OK.
5 ) Click OK again to save your configuration.
T7 What should I do if I cannot find my wireless network or I cannot
connect the wireless network?
¾ If you fail to find any wireless network, follow the steps below:
1 Make sure the wireless function is enabled if you're using a laptop with built-in
wireless adapter. You can refer to the relevant document or contact the laptop
manufacturer.
2 Make sure the wireless adapter driver is installed successfully and the wireless
adapter is enabled. You can refer to the relevant document or contact the wireless
adapter manufacturer.
¾ If you can find other wireless network except your own, follow the steps below:
1 Check the Wi-Fi LED indicator on your wireless router/modem;
2 Make sure your computer/device is still in range of your router/modem. Move closer
if you are currently too far away.
3 Go to Basic > Wireless
Wireless Name (SSID) is not hidden.
4 Connect to wireless network.
> Change adapter
Internet Protocol Version 4
Obtain an IP address automatically
Internet Protocol (TCP/IP).
Obtain an IP address automatically
page, and check the wireless settings, double-check your
settings.
(TCP/IPv4).
and Obtain DNS server address
and Obtain DNS server address
Open Network and
Open Network
113