TP-Link Archer VR2800 User Manual page 78

Chapter 13
3 ) In the IPSec Connection Name
4 ) In the Remote IPSec Gateway (URL)
5 ) Configure Site A's
In the Tunnel access from local IP addresses
as an example. Input the LAN IP range of Site A in the
and input Subnet Mask
6 ) Configure Site B's
In the Tunnel access from remote IP addresses
Address as an example. Input the LAN IP range of Site B in the
VPN column, and input
7 ) Select the Key Exchange Method
column, specify a name.
column, Enter Site B's WAN IP address.
LAN.
of Site A.
LAN.
Subnet Mask of Site B.
for the policy. We select
column, we take Subnet Address
IP Address for VPN
column, we take
IP Address for
Auto(IKE)
VPN Server
column,
Subnet
here.
74