Change The Administrator Account; Local Management - TP-Link Archer VR2800 User Manual

Chapter 15
15 5

Change the Administrator Account

Admin account is used to log in to the modem router's web management page. You are
required to set the admin account at first login. You can also change it on the web page.
1 Visit http://tplinkmodem.net, and log in with the account you set for the router.
2 Go to Advanced
Management section.
3 Enter the old password. Enter the new password and enter again to confirm.
4 Click Save to make the settings effective.
15 6

Local Management

You can control the local devices' authority to manage the modem router via Local
Management feature. By default all local connected devices are allowed to manage
the modem router. You can also specify one device to manage the modem router and
enable local management over a more secure way, HTTPS.
Follow the steps below to allow only the specific device to manage the router via the
local management over HTTPS.
1 Visit http://tplinkmodem.net, and log in with the account you set for the router.
2 Go to Advanced
Management section.
3 Keep the Port as the default setting. Enable
Port for HTTPS as the default setting. Enter the
local device to manage the modem router.
> System Tools >
> System Tools >
Administrate Your Network
Administration page. Locate the
Administration page. Locate the
Management over HTTPS
IP address
Account
Local
and keep the
or MAC address of the
100