Fig. 38: Starpoint Ring Nut Vrm - ABB HT610874 Operation Manual

Operation Manual / A130-M.. - A145-M..
9 Dismantling and fitting / 9.2 Material required
Starpoint ring nuts
Two ring nuts (M16) are required for safer lifting of the cartridge group, which are not in-
cluded in the Turbo Systems scope of delivery.
Fig. 38: Starpoint ring nut VRM
Lifting gear
WARNING
Suspended loads
Loads that are not attached according to regulations can cause injury to
personnel or fatal accidents.
Only fasten the turbocharger, assemblies or individual parts on properly
u
functional lifting gear with sufficient load limit.
Pay attention to the correct attachment of loads on the crane hook.
u
People must not stand beneath suspended loads.
u
Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
Definition of terms
¡
Suspension point
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
¡
Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. As-
sembly devices are specially constructed and designed for the defined use; they are not
commercially available products. Use assembly devices only for the described applica-
tions.
¡
Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting
gear is not supplied by ABB.
© Copyright 2022 ABB. All rights reserved. HZTL4031_EN Rev.P February 2022