Wall Insert; Fig. 46: Dismantling The Wall Insert - ABB HT610874 Operation Manual

Operation Manual / A130-M.. - A145-M..
9 Dismantling and fitting / 9.7 Removing the compressor casing
Dismantling the wall insert
Fig. 46: Dismantling the wall insert
1. Knock the wall insert (77000) out of the compressor casing (72000) with a plastic tip
hammer.
2. Attach swivel lifting eye (S) to the compressor casing (72000) and the lifting gear.
3. Lift up the compressor casing (72000).
4. Remove and dispose of the O-ring (77005).
© Copyright 2022 ABB. All rights reserved. HZTL4031_EN Rev.P February 2022