Removing The Nozzle Ring; Fig. 52: Removing The Nozzle Ring - ABB HT610874 Operation Manual

Operation Manual / A130-M.. - A145-M..
9 Dismantling and fitting / 9.10 Removing the nozzle ring
9.10

Removing the nozzle ring

Fig. 52: Removing the nozzle ring
1. If present: Remove the metal C-ring (51105).
2. Position the fastening strips (51002) in place.
3. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
4. Remove the lamellar sealing ring (56005).
5. Remove the burst ring (57210).
© Copyright 2022 ABB. All rights reserved. HZTL4031_EN Rev.P February 2022