Cover Plate Drawing; Fig. 70: Cover Plate Drawing; Table 49: Cover Plate Dimensions [Mm] - ABB HT610874 Operation Manual

Operation Manual / A130-M.. - A145-M..
10 Taking out of operation at short notice / 10.5 Cover plate drawing
10.5

Cover plate drawing

The cover plate is not included in the Turbo Systems scope of delivery and must be manufac-
tured by the operating company according to the following drawing.
Material: General structural steel, in accordance with DIN EN 10025-2.
Fig. 70: Cover plate drawing
Product B1 B2
± 0.5
A130 65.7 60
A135 79.6 80
A140 98.2 102
A145 116.8 120
Table 49: Cover plate dimensions [mm]
© Copyright 2022 ABB. All rights reserved.
B3 B4 B5
± 0.2
130 11.7 1.4
155 14.2 1.6
190 17.2 2.0
226 20.5 2.4
HZTL4031_EN
B6 B7 ØD1
± 0.2
150 35.7 227.7
180 39.6 271.7
220 48.2 332.5
260 56.8 395.9
ØD2 R1 M
17 ≤ 105 M8
21 ≤ 125 M8
25 ≤ 153 M10
31 ≤ 182 M10
Rev.P February 2022