Fig. 33: Cleaning The Filter Silencer - ABB HT610874 Operation Manual

Operation Manual / A130-M.. - A145-M..
7 Periodic maintenance work / 7.4 Cleaning components mechanically
7.4.2 Cleaning the filter silencer
Fig. 33: Cleaning the filter silencer
81135 Filter silencer body
81136 Absorption segment
81137 Sheet-metal covering
81265 Filter ring
If present: Clean the filter ring (81265)
Remove the filter ring.
u
Clean the filter ring as required or every 500 hours of operation, and replace it after the
u
fifth cleaning process at the latest.
Contamination of the filter ring depends on the degree of purity of the sucked-in air.
Rinse the filter ring with water and mild detergent or, in the case of heavy contamination,
u
soak and carefully push through. Rinse in cold water. Avoid high mechanical loads (water
jet).
Let the filter ring dry completely before assembling.
u
Dirty water and mild detergent must be disposed of in compliance with locally applicable
u
regulations.
© Copyright 2022 ABB. All rights reserved.
81266 Cover grid
81270 Tension band
81271 Lock
HZTL4031_EN Rev.P February 2022