Warning Plates On The Turbocharger; Fig. 6: Warning Plate Locations - ABB HT610874 Operation Manual

Operation Manual / A130-M.. - A145-M..
2 Safety / 2.7 Warning plates on the turbocharger
2.7

Warning plates on the turbocharger

Warning plates are affixed at the following locations:
Fig. 6: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from Turbo Systems service stations.
u
Remove any warning plates that have become unreadable.
u
Clean and degrease the areas designated for the warning plates.
u
Fit new warning plates and remove protective sheets.
u
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2022 ABB. All rights reserved. HZTL4031_EN Rev.P February 2022