Temperature - DAVIS Weather Monitor II Owner's Manual

To Change the Time Format
1. Press TIME once or twice to select the time.
2. Press UNITS.
The console switches from the 12-hour to the 24-hour format (or vice versa) and
the symbol changes from AM or PM to 24 HR (or vice versa). To return to the
original format, press UNITS again.
To Change the Time
1. Press TIME once or twice to select the time.
2. Press UNITS to select the 12-or24-hour format, as desired.
3. Use ENTER to set the correct time (see "Using the Enter Key" on page 16 for instruc-
tions).
4. Press any key to exit.
To Change the Date
1. Press TIME once or twice to select the date.
2. Use ENTER to set the correct date (see "Using the Enter Key" on page 16 for instruc-
tions).
3. Press any key to exit.
To Use the Time Alarm
For instructions on how to use the time alarm, see "Alarms" on page 30.
T
EMPERATURE
The Weather Monitor II measures and displays two temperature readings. One
reading is from the temperature sensor inside the console. The other reading is
from the external temperature sensor (or optional External Temperature/
Humidity Sensor). Both readings may be displayed in either ˚F or ˚C in incre-
ments of either 1˚ or 0.1˚.
The Weather Monitor II also records high and low temperatures for each set of
temperature readings.
Weather Monitor II
N
NW
NE
W E
MPH
SW SE
S
24-
HOUR
24HR
BAROMETRIC
TREND
T D
IME ISPLAY

Temperature

Page 19