DAVIS Weather Monitor II Owner's Manual page 30

Using the Weather Functions
To Change the Unit of Measure
1. Press BAR.
2. Press UNITS until the desired unit of measure (IN, MM or MB) appears in the display.
N
NW NE
W E
MPH
SE
SW
S
Barometer: 758.7 mm of Hg
To Display the Stored Barometric Pressure
1. Press BAR to display barometric pressure.
2. Press UNITS to select IN, MM, or MB as desired.
3. Press RECL to display the stored barometric pressure.
If you have not stored a barometric pressure, the stored barometric pressure will
be 0. After a few seconds the display will show the time it was recorded, and
then the date it was recorded.
4. Press any key to exit.
To Store a Barometric Pressure
1. Press BAR.
2. Press RECL to display the stored barometric pressure.
3. Press CLEAR.
The display flashes several times and then the current barometric pressure
appears in the display. The current barometric pressure is now stored, along with
the time and date.
4. Press any key to exit.
Note: Each time you enter a new stored barometric pressure you clear the previous one. There is no
way to clear a stored barometric pressure without entering a new one.
Page 26
BAROMETER
BAROMETRIC
TREND
B P
AROMETRIC RESSURE IN
N
NW
NE
W
MPH
SW SE
S
S
TORED
N
NW
MM
W
MPH
SW
S
M
ILLIMETERS AND
E
BAROMETER
STORED
BAROMETRIC
TREND
B P
AROMETRIC RESSURE
NE
E
BAROMETER
SE
BAROMETRIC
Barometer: 1011.5 mb
M
ILLIBARS
IN
MB
TREND
Weather Monitor II