DAVIS Weather Monitor II Owner's Manual page 24

Using the Weather Functions
To Display Current Temperatures
1. To display inside temperature, press TEMP .
The inside temperature reading and the word INSIDE appear on the display.
2. To display outside temperature, press TEMP again.
The outside temperature reading and the word OUTSIDE appear on the display.
N
NW NE
W E
MPH
SW SE
S
Outside Temperature: 68.7˚F
To Change the Unit of Measure
1. Press TEMP once or twice to select inside or outside temperature, as desired.
2. Press UNITS until the desired unit of measure and resolution (1˚F, 0.1˚F, 1˚C, 0.1˚C)
appear in the display.
To Display High and Low Temperatures
1. Press TEMP once or twice to select inside or outside temperature, as desired.
2. Press UNITS to select ˚F or ˚C as desired.
3. Press RECL to display the high.
After a few seconds, the display will show the time the high was recorded, and
then the date it was recorded.
4. Press RECL again to display the low.
After a few seconds, the display will show the time the low was recorded, and
then the date it was recorded.
5. Press any key to exit.
N
NW NE
W E
MPH
SW SE
S
High Inside Temperature: 27.2˚C
To Clear High and Low Temperatures
1. Press TEMP once or twice to select inside or outside temperature, as desired.
2. Press RECL once or twice to select the high or low temperature, as desired.
Page 20
OUTSIDE
TEMPERATURE
F
BAROMETRIC
TREND
I O
NSIDE AND UTSIDE
HIGH
INSIDE
TEMPERATURE
BAROMETRIC
TREND
H L
IGH AND
N
NW
W
SW
S
T
EMPERATURE
N
NW
C
W
MPH
SW
S
Low Outside Temperature: 44˚F
T D
OW EMPERATURE ISPLAYS
INSIDE
TEMPERATURE
NE
E
MPH
SE
BAROMETRIC
Inside Temperature: 24˚C
D
ISPLAYS
LOW OUTSIDE
TEMPERATURE
NE
E
SE
BAROMETRIC
C
TREND
F
TREND
Weather Monitor II