Filter Function Settings - Yaesu FTM-100DR Instruction Manual

Filter function settings

The sets the filter for the downloading of various types of beacons.
1
Press for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select [10 APRS], then press
The menu list will be displayed.
3
Turn the DIAL, select [3 APRS FILTER], then press
.
The filter setting screen will be displayed.
Ifitemdoes not appear on the display, turn the DIAL
to scroll the display.
• Mic-E: Download and display the microphone encoder beacon.
• POSITION: Download and display the position beacon and RAW NMEA data.
• WEATHER: Download and display the meteorological station beacon.
• OBJECT: Download and display the object beacon.
• ITEM: Download and display the item beacon.
• STATUS: Download and display the status beacon.
• OTHER: Download and display the non-APRS packets
• RANGE LIMIT: This restricts reception to beacons that lie within a specified range
• ALT.NET: Download and display the packets specified by the destination address
in alternate nets.
4
Turn the DIAL and select [1 Mic-E].
5
Press and selectON or OFF.
Pressing
ON: Download the beacon.
OFF: Do not download the beacon.
6
Turn the DIAL to [2 POSITION], [3 WEATHER], [4 OBJECT], [5 ITEM], [6
STATUS], or [7 OTHER] and select, then press
OFF.
Pressing
7
Turn the DIAL, select [8 RANGE LIMIT], then press
.
Move the cursor over the item for which you would
like to enter numbers.
from your own station. There will be no limit on the distance when
this is set to OFF. The unit follows the setting under "2 DISTANCE"
of "11 APRS UNITS".
turns this function ON and OFF.
turns this function ON and OFF.
Using the APRS set-up menu
.
to turn the function ON or
58