Supermicro X11DGQ User Manual page 92

Super X11DGQ User's Manual
Port 61h Bit-4 Emulation
Select Enabled for I/O Port 61h-Bit 4 emulation support to enhance system performance. The
options are Enabled and Disabled.
Server ME (Management Engine) Configuration

This feature displays the following system ME configuration settings.
•
Oper. (Operational) Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1/ME Firmware Status #2
•
Current State
•
Error Code
PTT Support (Available when TPM Configuration is set to Disable.)
Select Enable to support Intel® Platform Trust Technology (PTT) to enhance system security
and data integrity. Intel PTT technology integrates the Host software stack, the system BIOS,
Manageability Engine (ME) features, and the PCH to run on Intel's TCG (Trusted Computing
Group) in conjunction with the TPM (Trusted Platform Module) firmware installed in your
system to ensure data security and integrity. The options are Disable and Enable.
Suppress PTT Commands (Available when PTT Support is set to Enable.)
Select Enable to bypass TPM2 commands and submit the system to the PTT (Platform Trust
Technology) Firmware.
(PCH) SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enable and Disable.
Configure SATA as (Available when SATA Controller is set to Enable)
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID. (Note: This item is hidden when the SATA Controller item is set to Disabled.)
92