Supermicro X11DGQ User Manual page 89

Chapter 4: UEFI BIOS
IOAT Configuration
Disable TPH (TLP Processing Hint)
TPH is used for data-tagging with a destination ID and a few important attributes. It can
send critical data to a particular cache without writing through to memory. Select No in this
item for TLP Processing Hint support, which will allow a "TPL request" to provide "hints"
to help optimize the processing of each transaction occurred in the target memory space.
The options are Yes and No.
Prioritize TPH (TLP Processing Hint)
Select Yes to prioritize the TPL requests that will allow the "hints" to be sent to help facilitate
and optimize the processing of certain transactions in the system memory. The options are
Enable and Disable.
Relaxed Ordering
Select Enable to allow certain transactions to be processed and completed before other
transactions that have already been enqueued. The options are Disable and Enable.
Intel VT for Directed I/O (VT-d)

Intel® VT for Directed I/O (VT-d)
Select Enable to use Intel Virtualization Technology support for Direct I/O VT-d by reporting
the I/O device assignments to the VMM (Virtual Machine Monitor) through the DMAR
ACPI tables. This feature offers fully-protected I/O resource sharing across Intel platforms,
providing greater reliability, security and availability in networking and data-sharing. The
options are Enable and Disable.
ACS (Access Control Services) Control
Select Enable to program Access Control Services to Chipset PCI-E Root Port Bridges.
Select Disable to program Access Control Services to all PCI-E Root Port Bridges. The
options are Enable and Disable.
Interrupt Remapping
If this feature is set to Enable, I/O DMA transfer remapping and device-generated interrupts
will be supported. The options are Enable and Disable.
PassThrough DMA
Select Enable for the Non-Isoch VT-d engine to pass through DMA (Direct Memory Access)
to enhance system performance. The options are Enable and Disable.
ATS
Select Enable to enable ATS (Address Translation Services) support for the Non-Isoch VT-d
engine to enhance system performance. The options are Enable and Disable.
89