Dimm Installation; Dimm Module Removal - Supermicro X11DGQ User Manual

DIMM Installation

1. Follow the instructions given in the
memory population guidelines listed in
the previous sections to install memory
modules on your motherboard. For the
system to work properly, please use
memory modules of the same type and
speed on the motherboard. (See the Note
below.)
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press on both
ends of the module straight down into the
slot until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Module Removal

Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing on the right.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
VROC
LE6
(JRK1) JTPM1
X11DGQ
REV:1.00
DESIGNED IN USA
FAN9 FAN8
HDD_PWR1 M.2
HDD_PWR2
JL1
JPW3
BT1
Release Tabs
39
Chapter 2: Installation
JBT1
JSDCARD1
JPSU2 JPSU1
JPW2
JPW1
Notches
Press both notches
straight down into
the memory slot.