Supermicro X11DGQ User Manual page 122

Super X11DGQ User's Manual
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration
The following items will be displayed:
•
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Dedicated.
•
IPMI Network Link Status: This feature displays the IPMI Network Link status. The default
setting is Dedicated LAN.
•
Current Configuration Address Source: This feature displays the Current Configuration
address source. The deault setting is DHCP.
•
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
•
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
•
VLAN: This feature displays the status of VLAN support. The default setting is Disabled.
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes upon next system boot.
The options are No and Yes. If this option is set to Yes, the following items will display:
IPMI LAN Selection (Available when Update IPMI LAN Configuration is set to Yes)
Use this feature to select the type of the IPMI LAN. The options are Dedicated, Shared,
and Failover.
VLAN
Select Enabled to enable IPMI VLAN function support. The default setting is Disabled.
Configuration Address Source
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
122