Supermicro X11DGQ User Manual page 44

Super X11DGQ User's Manual
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting
both pins will power on/off the system. This button can also be configured to function as a
suspend button (with a setting in the UEFI BIOS - see Chapter 4). To turn off the power when
the system is in suspend mode, press the button for 4 seconds or longer. Refer to the table
below for pin definitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
1
PWR
Power Button
2
Reset
Reset Button
3.3V
UID LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
NMI
Power Button
Pin Definitions (JF1)
Pins Definition
1 Signal
2 Ground
Reset Button
Pin Definitions (JF1)
Pins Definition
3 Reset
4 Ground
1 2
Ground
Ground
Power Fail LED
OH/Power Fail/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
HDD LED
PWR LED
Ground
19 20
44
1. PWR Button
2. Reset Button