Power Management
•
ACPI power management
•
SuperDoctor® 4, 5
•
Power-on mode override mechanism
•
Power-on mode for AC power recovery
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for 1.8V, +3.3V, +5V, +/-12V, +3.3V Stby, +5V Stby, HT, Memory, PCH Temp, System Temp,
Memory Temp
•
CPU 5+1-phase switching voltage regulator
•
CPU thermal trip support
Fan Control
•
Two (2) 6-pin fan headers (FAN8/9)
•
Seven (7) proprietary fan headers
•
Multi fan speed control support via onboard BMC
System Management
•
PECI (Platform Environment Control Interface) 2.0 support
•
UID (Unit Identification)/Remote UID
•
System resource alert via Superdoctor 5
•
SuperDoctor 5, Watch Dog, NMI, RoHS
•
Chassis intrusion header and detection (Note: please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
•
HDD activity LED
•
LAN activity LED
•
CPU/system overheat LED
•
Power/suspend-state indicator LED
•
Fan failed LED
Dimensions
•
12.9" (L) x 16.8" (W) (327.6 mm x 426.7 mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specifications for proper CPU TDP sizing.
Note 2: For IPMI configuration instructions, please refer to the Embedded IPMI Con-
figuration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: It is strongly recommended that you change BMC login information upon initial
system power-on. The manufacturer default username is ADMIN and the password
is ADMIN. For proper BMC configuration, please refer to http://www.supermicro.com/
products/info/files/IPMI/Best_Practices_BMC_Security.pdf
Motherboard Features
15
Chapter 1: Introduction