Sena SP56 Manual page 4

EUT is marketed without helmet, so when the EUT is mounted with helmet, it has to be to maintain a
distance of 34.5 mm from one's headsurface.
Safety Precautions
Please ensure that the product is properly used by observing the warnings and cautions below to prevent
any risk and/or damage to property.
Product Storage and Management
• Keep the product free of dust. It may damage mechanical and electronic parts of the product.
• Do not store the product in high temperatures as this may reduce the life span of electronic devices,
damage the battery, and/or melt plastic parts of the product.
• Excessive heat (e.g. exhaust heat) can cause damage to the decoration, the inner shell of the helmet and
the interior lining.
• Do not store the product in cold temperatures. Abrupt changes in temperatures may cause condensation
and damage electronic circuits.
• Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage
the product.
• Direct contact with motor fuel, thinners or solvents can destroy the structure of the inner and outer shell.
Make sure the helmet does not come into contact with such substances, even for cleaning purposes.