Related Manuals for Sena SF1-01
Summary of Contents for Sena SF1-01
- Page 1 SERIES ® Motorcycle Bluetooth Communication System 1.2 km Audio 0.8 mile Multitasking User’s Guide www.sena.com...
- Page 2 ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or registered...
-
Page 3: Table Of Contents
6.2 Speed Dialing ........................19 14.1 Mobile Phone Pairing ......................37 6.3 GPS Navigation ........................20 14.2 Second Mobile Phone Pairing ....................37 6.4 Sena SR10, Two-Way Radio Adapter ...................21 14.3 Phone Selective Pairing ......................38 STEREO MUSIC ....................21 14.4 Media Selective Pairing ......................38 7.1 Bluetooth Stereo Music ......................21... - Page 4 SF Series 14.7 Remote Control Pairing ......................39 14.8 Universal Intercom Pairing ....................39 14.9 Factory Reset ........................39 14.10 Exit Voice Configuration Menu ..................39 15 SOFTWARE CONFIGURATION SETTINGS ............40 15.1 Assigning Speed Dial ......................40 15.2 Headset Language .......................40 15.3 Setting Audio Source Priority (Default: Intercom) ..............40 15.4 Enabling/Disabling Voice Activated Phone Answering (Default: Enable)......41 15.5 Enabling/Disabling Voice Activated Intercom (Default: Disable) .........41 15.6 Enabling/Disabling HD Voice (Default: Enable) ..............41...
-
Page 5: Introduction
• Built-in FM radio tuner with a station scan and save function** • Music Sharing • Advanced Noise Control™ Thank you for choosing the Sena SF Series, Bluetooth Stereo Headset • Microphone mute option and Intercom. With the SF Series, you can call hands-free on your •... -
Page 6: Package Contents
SF Series Speaker 2 PACKAGE CONTENTS • Speakers • Headset Main Unit • Hook and Loop Fasteners for Speakers (2) • Clamp Kit SF2, SF4 • Speakers • HD Speakers • Glued Surface Mounting Adapter • Hook and Loop Fasteners for Speakers (2) -
Page 7: Installing The Sf Series On Your Helmet
SF Series Wired Boom Microphone 3 INSTALLING THE SF SERIES ON YOUR • Wired Boom Microphone HELMET • Hook and Loop Fastener for Boom Microphone • Microphone Sponges (2) Installing the Main Unit 3.1.1 Installing the Clamp Kit to the Main Unit •... - Page 8 SF Series 3.1.2 Using the Glued Surface Mounting Adapter for the Main 2. Insert the back plate of the clamp kit between the internal padding Unit and external shell on the left side of the helmet. If the clamp kit is not inserted into the helmet firmly, you can use the glued surface mounting adapter.
- Page 9 SF Series 2. While pushing the latch at the center of the clamp kit, push the 4. Push and hold the clamp kit’s tab upwards. While pushing up the back plate of the clamp kit outwards to remove it. tab, insert the main unit into the clamp kit. 3.
-
Page 10: Installing The Speakers
SF Series 6. Peel off the glued cover and attach the main unit on the left side 3. Connect the speaker cable to the speaker connector. of your helmet. Installing the Microphones Installing the Speakers 3.3.1 Using the Wired Boom Microphone 1. - Page 11 SF Series 3. Align the arrows on the main unit and microphone cables and 2. Attach the wired microphone to the hook and loop fastener for the insert the microphone cable into the microphone connector. wired microphone. 3. Align the arrows on the main unit and microphone cables and 3.3.2 Using the Wired Microphone insert the microphone cable into the microphone connector.
-
Page 12: Getting Started
The headset will be fully charged in about 1.5 hours. (The charging time may vary depending on the charging method.) Button Operation • Any 3rd party USB charger can be used with Sena products if the Center Button charger is approved by either the FCC, CE, IC, or other locally •... -
Page 13: Checking The Battery Level
SF Series Checking the Battery Level Volume Adjustment You can easily adjust the volume by tapping the (+) Button or the (-) 4.4.1 LED Indicator Button. The volume is set and maintained independently at different When the headset is powering on, the red LED flashes rapidly levels for each audio source even when you reboot the headset. -
Page 14: Sena Softwares
Sena Bluetooth headsets. The pairing operation is required only once for each Bluetooth device. The headset By simply pairing your phone with your headset, you can use the Sena remains paired with the devices and automatically reconnects to them Motorcycles App for quicker and easier set up and management. -
Page 15: Second Mobile Phone Pairing - Second Mobile Phone, Gps, And Sr10
2. Search for Bluetooth devices on your smartphone. Select the 10 seconds until you hear a voice prompt, “Configuration menu.” Sena SF Series in the list of devices detected on your phone. 2. By tapping the (+) Button, you will hear a voice prompt, “Phone 3. -
Page 16: Advanced Selective Pairing - A2Dp Stereo Or Hands-Free
A2DP Stereo Music Only 3. Search for Bluetooth devices on your mobile phone. Select the Sena SF Series in the list of the devices detected on the mobile 1. To enter the voice configuration menu, press and hold the phone. -
Page 17: Intercom Pairing
App without remembering the button operation. 1. Pair the mobile phone with the headset. Note: 2. Open the Sena Motorcycles App and tap (Smart Intercom The Smart Intercom Pairing (SIP) is not compatible with Sena products Pairing Menu). that use Bluetooth 3.0 or below. -
Page 18: Mobile Phone, Gps, Sr10
SF Series 5.4.2 Using the Button 6 MOBILE PHONE, GPS, SR10 1. Turn on the two headsets (A and B) that you would like to pair with each other. 2. Press and hold the Center Button for 5 seconds, then you will hear a mid-toned single beep and a voice prompt, “Intercom pairing.”... -
Page 19: Speed Dialing
SF Series Speed Dialing Note: You can quickly make a phone call by using the voice speed dial 1. If you have two phones connected to your headset and you have an menu. incoming call from the second phone during the call of the first phone, 1. To enter into the voice speed dial menu, press and hold the (+) then you may still receive the call from the second phone. In this case, Button for 3 seconds and you will hear a mid-toned single beep the call from the first phone is on waiting mode. If you end a call, then it... -
Page 20: Gps Navigation
Center Button. If you do not press any button within the Sena SF Series in the list of the devices detected on the GPS. 15 seconds, the SF Series will exit the voice speed dial menu and 4. -
Page 21: Sena Sr10, Two-Way Radio Adapter
You can use a two-way radio and an intercom conversation or a mobile 1. To play or pause music, press the Center Button for 1 second until phone call simultaneously by using the Sena SR10, a Bluetooth Two- you hear a double beep. -
Page 22: Intercom
SF Series Music Sharing 8 INTERCOM You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press the Center Button for Two-way Intercom 1 second during an intercom conversation. -
Page 23: Three-Way Intercom
SF Series Three-way Intercom (SF4) 8.1.2 Ending Two-way Intercom You can end an intercom conversation by using the Center Button. You 8.2.1 Starting Three-way Intercom can single tap to end intercom with the first intercom friend, double You (A) can have a three-way conference intercom with two other SF4 tap to end intercom with the second intercom friend, and triple tap to friends (B &... - Page 24 SF Series 1. You (A) need to be paired with two other friends (B & C) for three- 3. You (A) can call the second intercom friend (C) by double tapping way conference intercom. the Center Button, or the second intercom friend (C) may join the intercom by making an intercom call to you (A).
-
Page 25: Four-Way Intercom
SF Series Four-way Intercom (SF4) 8.2.2 Ending Three-way Intercom You can completely terminate the conference intercom or just 8.3.1 Starting Four-way Intercom disconnect an intercom connection with one of your active intercom You can have four-way conference intercom with three other SF4 users friends. -
Page 26: Three-Way Conference Phone Call With Intercom Participant
SF Series 2. Tap or double tap the Center Button to disconnect the intercom 9 THREE-WAY CONFERENCE PHONE CALL connection with one of the two intercom friends accordingly. However, when you disconnect the second friend (C) by double WITH INTERCOM PARTICIPANT (SF4) tapping the Center Button, you will be disconnected with the third participant (D) as well. - Page 27 SF Series 2. When you have an incoming intercom call during a mobile phone Tap the Center Button while having a mobile call, you will hear 4 high-toned beeps, alerting you that there is Start phone call an incoming intercom call. You will also hear a voice prompt, End intercom first Tap the Center Button “Intercom requested.”...
-
Page 28: Group Intercom
Universal Intercom function. Non-Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they 1. Go through intercom pairing with up to three headsets you want to support the Bluetooth Hands-Free Profile (HFP). -
Page 29: Universal Intercom Pairing
Bluetooth intercom conversation. You can pair the headset with only Bluetooth headsets using the same intercom connection method as one non-Sena Bluetooth headset so if you pair with a different non- you would between other Sena headsets. You may single tap the Sena Bluetooth headset, the previous pairing will be removed. -
Page 30: Three-Way Universal Intercom
1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and another SF4 headset (C) for the three-way conference intercom. -
Page 31: Four-Way Universal Intercom
SF Series 11.4 Four-way Universal Intercom (SF4) 4. Now you (A), non-Sena Bluetooth headset (B), and the other SF4 (C) are having a three-way conference intercom. You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SF4s and one non-Sena Bluetooth headset or 2) two SF4s and two non-Sena Bluetooth headsets . - Page 32 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the SF4 (C). Two SF4 headsets (A and C) and two non-Sena Bluetooth headsets (B and D). 1. You (A) may start an intercom conversation with the non-Sena Bluetooth headset (B).
-
Page 33: Fm Radio
11.4.2 Four-way Universal Intercom Case 2 12 FM RADIO (SF4) Three SF4 headsets (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as case 1 described in section 11.4.1 . 12.1 FM Radio On and Off To turn on the FM radio, press the (-) Button for 1 second until you hear a mid-toned double beep sound. -
Page 34: Seek And Save
“Seek” is the function that searches for station to station frequencies. 1. You can save FM stations to presets before using FM radio. Connect the To use the “Seek” function, please follow the procedure below: SF4 to your PC and open the Sena Device Manager. It allows you to save 1. Double tap the (+) Button or the (-) Button to search up or down up to 10 FM station frequency presets on the SF4 settings menu. You may the station dial. -
Page 35: Temporary Preset
Intercom 12.6 Region Selection Music sharing by Bluetooth stereo music You can select the proper FM frequency region from the Sena Device Manager. With the region setting, you may optimize the seek function Bluetooth stereo music to avoid unnecessary frequency ranges (factory default: worldwide). -
Page 36: Headset Configuration Settings
SF Series Note: 14 HEADSET CONFIGURATION SETTINGS If you select music as the audio source priority, the order of priority will change as below: (highest) Mobile phone You can set the configuration of the SF Series by the voice menu instruction described below. Bluetooth stereo music 1. -
Page 37: Mobile Phone Pairing
SF Series 14.1 Mobile Phone Pairing The voice prompt for each menu item is as below: (1) Phone pairing (6) Delete all pairings Voice Prompt “Phone pairing” (2) Second mobile phone pairing (7) Remote control pairing (3) Phone selective pairing (8) Universal intercom pairing Factory Default (4) Media selective pairing... -
Page 38: Phone Selective Pairing
SF Series 14.3 Phone Selective Pairing 14.5 GPS Pairing Voice Prompt “Phone selective pairing” Voice Prompt “GPS pairing” Factory Default Factory Default To go into phone selective pairing mode, tap the (+) Button or the (-) To go into GPS pairing mode, tap the (+) Button or the (-) Button until you hear a voice prompt, “GPS pairing.”... -
Page 39: Remote Control Pairing
SF Series 14.7 Remote Control Pairing 14.9 Factory Reset Voice Prompt “Remote control pairing” Voice Prompt “Factory reset” Factory Default Factory Default Execute Tap the Center Button Execute Tap the Center Button To enter into remote control pairing mode, tap the (+) Button or the (-) To restore factory default settings on the SF Series, tap the (+) Button Button until you hear a voice prompt, “Remote control pairing.”... -
Page 40: Software Configuration Settings
Second Mobile Phone Pairing None In addition to the headset configuration menu, you can change the Phone Selective Pairing None settings of the SF Series through the Sena Device Manager or the Sena Motorcycles App. Media Selective Pairing None GPS Pairing None 15.1 Assigning Speed Dial... -
Page 41: Enabling/Disabling Voice Activated Phone Answering (Default: Enable)
SF Series 15.4 Enabling/Disabling Voice Activated Phone 15.6 Enabling/Disabling HD Voice (Default: Enable) Answering (Default: Enable) HD Voice allows you to communicate in high-definition during phone If this feature is enabled, you can answer incoming calls by voice. calls. This feature increases the quality so that the audio will be crisp When you hear a ringtone for an incoming call, you can answer the and clear during phone call conversations. -
Page 42: Enabling/Disabling Hd Intercom (Default: Enable)
SF Series 15.7 Enabling/Disabling HD Intercom (Default: Enable) 15.9 Enabling/Disabling RDS AF (Default: Disable) (SF4) HD Intercom enhances the two-way intercom audio from normal RDS AF allows a receiver to re-tune to the second frequency location quality to HD quality. HD Intercom will become temporarily disabled when the first signal becomes too weak. -
Page 43: Enabling/Disabling Audio Multitasking™ (Default: Disable)
The volume of the foreground audio can be adjusted using the headset. How much background audio that is heard can be adjusted using the Sena Motorcycles App. HD Intercom, HD Voice, and Audio Source Priority SF1/SF2 become disabled temporarily when Audio Multitasking is enabled. -
Page 44: Background Volume (Default: Level 5)
1. Audio Multitasking will be activated during two-way intercom conversations with a headset that also supports this feature. 2. When Audio Multitasking is disabled, the background audio source will The SF Series support firmware upgrades. You can update the return to its independent volume level. firmware using the Sena Device Manager. Please visit Sena Bluetooth 3. For Audio Multitasking to work properly, you need to power the headset website at www.sena.com to check the latest software downloads. off and on. Please restart the headset. 4. Some GPS devices may not support this feature. -
Page 45: Troubleshooting
SF Series 17 TROUBLESHOOTING 17.1 Fault Reset When the SF Series are not working properly or is in faulty status for any reason, you may reset by gently pushing the pin-hole reset button on the back of the main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. - Page 46 3.0.1 www.sena.com...
Need help?
Do you have a question about the SF1-01 and is the answer not in the manual?
Questions and answers