Sena SP56 Manual page 8

Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
WEEE (Waste Electrical and Electronic Equipment)
The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical
and electronic products, batteries, and accumulators must be taken to separate collection at the end of their
working life. This requirement applies to the European Union and other locations where separate collection
systems are available. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please do not dispose of these products as unsorted municipal waste, but hand it in at an
official collection point for recycling.
DOT Certification
This product conforms to the DOT FMVSS 218 (US) helmet safety standards as defined by the United
States Department of Transportation Federal Motor Vehicle Safety Standard. This certification applies to
the United States of America. The approval label can be affixed permanently to the outside of the helmet
(United States, Argentina, Australia and others). Do not remove or attempt to remove the approval label
from the helmet. Do not affix approval labels of unknown origin to the helmet. These are more than likely
counterfeit labels. It is against the law to affix counterfeit labels to helmets. If you are in any doubt over the
origin of the approval label affixed to your helmet contact Sena directly, and not your dealer.
Product Warranty and Disclaimer
Limited Warranty
Sena Technologies, Inc. ("Sena") guarantees the product quality based on the technical specification stated
in the product manual, and data regarding product warranty. Here, product warranty extends to the product
only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from
using the product beyond defective parts or flaws that occur due to problems in manufacture.
Warranty Period
Sena guarantees free-of-charge repair or replacements of defective parts of the product or flaws that may
have occurred due to problems in manufacture for a period of 5 years for the helmet and 2 years for the