❻ Changing Light Mode/Checking Energy-Saving Effect Using Light Mode; Light Mode - NEC PA803UL User Manual

❻ Changing LIGHT MODE/Checking Energy-Saving Effect
Using LIGHT MODE [LIGHT MODE]
When either [ECO1] or [ECO2] in [LIGHT MODE] is selected, motion noise of the projector is cut down by lowering
brightness of its light source.
Icon at the bottom

LIGHT MODE

of the menu
NORMAL
ECO1
ECO2
LONG LIFE
To turn on the [LIGHT MODE], do the following:
1. Press ECO button on the remote control.
The [LIGHT MODE] screen will be displayed.
2. Press the ENTER button.
The [LIGHT MODE] selection screen will be displayed.
3. Use the ▼▲ buttons to make a selection, and press the ENTER
button.
The display will return to the [LIGHT MODE] screen and the selected
option will be applied.
Press the EXIT button to return to the original screen.
Description
100% brightness
The screen will be brightly lit.
Depending on the installation circumstances, the service life of optical
parts may be shorten.
Brightness will be at about 80%.
The cooling fan will also slow down accordingly.
Lower power consumption
Brightness will be at about 60%.
The cooling fan will also slow down accordingly.
Lower power consumption considerably
More eco-friendly setting than NORMAL and ECO1.
Brightness is about 30%.
This setting speeds up the cooling fan and optimizes the service life of
the optical parts. The most eco-friendly setting among the options.
33
3. Convenient Features