Connecting To A Hdbaset Transmission Device (Sold Commercially) - NEC PA803UL User Manual

Connecting to a HDBaseT transmission device (sold commercially)

Use a LAN cable sold commercially to connect the HDBaseT IN/Ethernet port of the projector (RJ-45) to a HDBaseT
transmission device sold commercially.
The HDBaseT IN/Ethernet port of the projector supports HDMI signals (HDCP) from transmission devices, control
signals from external devices (serial, LAN) and remote control signals (IR commands).
• Refer to the owner's manual accompanied with your HDBaseT transmission for connecting with your external de-
vices.
Connection example
Computer (for control use)
Our company's remote
control (RD-465E)
NOTE:
• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
• The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal)
• Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be
degraded as a result.
• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
Wired-Remote
AUDIO IN
LAN RS-232C
DC IN
Example of a transmission device
HDBaseT IN/Ethernet
146
6. Connecting to Other Equipment
Computer (for output use)
HDMI IN
COMPUTER IN
HDBaseT
HDMI output video device