2. Projecting an Image (Basic Operation)
TIP:
• The diagram below shows the lens shift adjustment range (orientation: desk/front).
Width of projected image
50%V
Height of projected image
100%V
10%H
10%H
10%V
100%H
20%H
20%H
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
Focus
Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has
been projected for over 30 minutes.
Please refer to page
85
in the User's Manual about the TEST PATTERN.
22