NEC PA803UL User Manual page 176

Model name
DisplayPort Video input
Audio input
PC control terminal
USB port
Ethernet/LAN/HDBaseT port
Remote terminal
3D SYNC output terminal
Usage environment
Power supply
Power con- LIGHT
sumption MODE
STANDBY
Rated input current
Power cord specification
External dimensions (W × H × D)
Weight
*1 Effective pixels are more than 99.99%.
*2 Compliance with ISO21118-2012
*3 This is the light output value (lumens) mounting the lens unit, NP41ZL, when the [PRESET] mode is set to [HIGH-BRIGHT]. The
light output values will be dropped according to the setting of [LIGHT MODE]. If any other mode is selected as the [PRESET]
mode, the light output value may drop slightly.
*4 If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly. With
the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed
due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
Video: HDR, Deep Color, 8/10/12-bit, Lip Sync.
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
HDMI: Supports HDCP 2.2/1.4
DisplayPort: Supports HDCP 1.3
HDBaseT: Supports HDCP 2.2/1.4
*5 Depending on the altitude and temperature, the projector goes into "Forced ECO Mode" in the state [NORMAL] or [ECO1] has
been selected for [LIGHT MODE].
*6 In UK, use a BS-approved power cord with molded plug having a black (13 A) fuse installed for use with this projector.
• These specifications and the product's design are subject to change without notice.
PA803UL/PA703UL/PA653UL
DisplayPort × 1
Data rate: 5.4 Gbps/2.7Gbps/1.62Gbps
No. lanes: 1 lane/2 lanes/4 lanes
Color depth: 8 bits, 10bits, 12bits
Colorimetry: RGB, YCbCr444, YCbCr422, REC709, REC601
HDCP compatible
DisplayPort: Sampling frequency – 32/44.1/48 kHz, Sampling bits – 16/20/24 bits
D-Sub 9-pin × 1
USB type A × 1
RJ-45 × 1, Supports 10BASE-T/100BASE-TX
Stereo mini jack × 1
5 V / 10 mA, synchronized signal output for 3D use
Operating temperature: 41 to 104°F (5 to 40°C)
Operating humidity: 20 to 80% (with no condensation)
Storage temperature: 14 to 122°F (-10 to 50°C)
Storage humidity: 20 to 80% (with no condensation)
Operating altitude: 0 to 3650 m/12000 feet
(1700 to 3650 m/5500 to 12000 feet: Set [FAN MODE] to [HIGH ALUTITUDE])
100-240 V AC, 50/60 Hz
NORMAL PA803UL: 798 W (100-130 V AC) / 774 W (200-240 V AC)
PA703UL: 647 W (100-130 V AC) / 632 W (200-240 V AC)
PA653UL: 627 W (100-130 V AC) / 613 W (200-240 V AC)
ECO1 PA803UL: 604 W (100-130 V AC) / 592 W (200-240 V AC)
PA703UL: 531 W (100-130 V AC) / 522 W (200-240 V AC)
PA653UL: 580 W (100-130 V AC) / 566 W (200-240 V AC)
ECO2 PA803UL: 470 W (100-130 V AC) / 464 W (200-240 V AC)
PA703UL: 414 W (100-130 V AC) / 410 W (200-240 V AC)
PA653UL: 437 W (100-130 V AC) / 431 W (200-240 V AC)
LONG LIFE PA803UL: 285 W (100-130 V AC) / 285 W (200-240 V AC)
PA703UL: 276 W (100-130 V AC) / 276 W (200-240 V AC)
PA653UL: 276 W (100-130 V AC) / 276 W (200-240 V AC)
Link-up 0.15 W (100-130 V AC) / 0.21 W (200-240 V AC)
Link-down 0.11 W (100-130 V AC) / 0.16 W (200-240 V AC)
PA803UL: 11.8 A (100-130 V AC), 5.2 A (200-240 V AC)
PA703UL: 10.5 A (100-130 V AC), 4.5 A (200-240 V AC)
PA653UL: 10.2 A (100-130 V AC), 4.5 A (200-240 V AC)
15 A or higher
22.8" (width) × 8.2" (height) × 19.5" (depth)/580 (width) × 208 (height) × 494 (depth)
mm (including protruding parts)
22.8" (width) × 8.1" (height) × 19.3" (depth)/580 (width) × 205 (height) × 490 (depth)
mm (not including protruding parts)
40.2 lbs/18.2 kg (not including lens)
(*4)
(*6)
159
8. Appendix
(*5)