❻ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [Eco Mode] - NEC PX750U2 User Manual

❻ Changing Eco Mode/Checking Energy-Saving Effect Using
Eco Mode [ECO MODE]
This feature enables you to select two brightness modes of the lamp:
OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].
[ECO MODE]
[OFF]
[ON]
To turn on the [ECO MODE], do the following:
1. Press the ECO/L-SHIFT button on the remote control to display [ECO MODE] screen.
2. Use the ▲ or ▼ button to select [ON].
3. Press the ENTER button.
To change from [ON] to [OFF], Go back to Step 2 and select [OFF]. Repeat Step 3.
NOTE:
• The [ECO MODE] can be changed by using the menu.
Select [SETUP] → [BASIC] → [LAMP MODE] → [ECO MODE].
• The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME].
• [ECO MODE] is always set to [OFF] immediately after the lamp is turned on. The lamp condition will not be affected even when
[ECO MODE] is changed.
• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to
[ON].
Description
This is the default setting (100% Brightness).
Low lamp power consumption (approx. 80% Brightness).
37
3. Convenient Features