Connecting Component Input - NEC PA803UL User Manual

Connecting Component Input

15-pin - to - RCA (female) × 3 cable
adapter (ADP-CV1E)
Component video RCA × 3 cable
(not supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER IN
NOTE:
• When the signal format is set to [AUTO] (default factory setting when shipped), the computer signal and component signal are
automatically distinguished and switched. If the signals cannot be distinguished, select [COMPONENT] under [ADJUST] →
[VIDEO] → [SIGNAL TYPE] in the on-screen menu of the projector.
• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).
COMPUTER IN
Blu-ray player
INPUT button on the projector
cabinet
4:COMPUTER
6. Connecting to Other Equipment
Audio Equipment
Stereo mini plug - to - RCA audio cable (not
supplied)
Button on the remote control
4/COMPUTER
144