Table of Contents
Advertisement
❽ Changing LIGHT MODE/Checking Energy-Saving Effect
Using LIGHT MODE [LIGHT MODE]
When either [ECO1] or [ECO2] in [LIGHT MODE] is selected, motion noise of the projector is cut down by lowering
brightness of its light source. By saving energy consumption, the CO
Icon at the bottom
LIGHT MODE
of the menu
NORMAL
ECO1
ECO2
LONG LIFE
* When the brightness is lowered, the cooling fan speed will be reduced accordingly.
To turn on the [LIGHT MODE], do the following:
1. Press LIGHT button on the cabinet.
• In another way, press ECO/L-SHIFT button on the remote control.
The [LIGHT MODE] screen will be displayed.
2. Press the ENTER button.
The [LIGHT MODE] selection screen will be displayed.
3. Use the ▼▲ buttons to make a selection, and press the ENTER
button.
The display will return to the [LIGHT MODE] screen and the selected
option will be applied.
Press the MENU button to return to the original screen.
Description
100% brightness
The screen will be brightly lit.
Brightness will be at about 80%.
The cooling fan will also slow down accordingly.
Lower power consumption
Brightness will be at about 50%.
The cooling fan will also slow down accordingly.
Lower power consumption considerably
Brightness is about 90%.
This setting speeds up the cooling fan and optimizes the service life of
the light source.
31
3. Convenient Features
emission from this projector can be reduced.
2
Advertisement
Table of Contents
