Connecting To A Hdbaset Transmission Device (Sold Commercially) - NEC PA1004UL-B User Manual

6-3. Connecting to a HDBaseT transmission device (sold commercially)

Use a LAN cable sold commercially to connect the HDBaseT IN/Ethernet port of the projector (RJ-45)
to a HDBaseT transmission device sold commercially.
The HDBaseT IN/Ethernet port of the projector supports HDMI signals (HDCP) from transmission
devices, control signals from external devices (serial, LAN) and remote control signals (IR commands).
• Refer to the owner's manual accompanied with your HDBaseT transmission for connecting with
your external devices.
Connection example
Computer (for control use)
Remote control
NOTE:
• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
• The maximum transmission distance over the LAN cable is 100 m.
• Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be
degraded as a result.
• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
WIRED REMOTE LAN RS-232C
DC IN
Example of a transmission device
HDBaseT IN/Ethernet
166
6. Connecting to Other Equipment
AUDIO IN HDMI IN
COMPUTER IN
HDBaseT
Computer (for output use)
HDMI output video device