Table of Contents
Advertisement
6. Installation and Connections
Connecting to an HDBaseT transmission device (sold commercially)
HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance.
Use a LAN cable sold commercially to connect the Ethernet / HDBaseT port of the projector (RJ-45) to a HDBaseT
transmission device sold commercially.
The Ethernet/HDBaseT port of the projector supports HDMI signals (HDCP) from transmission devices, control signals
from external devices (serial, LAN) and remote control signals (IR commands).
Connection example
Computer (for output use)
Computer (for control use)
Remote control
Example of a transmission device
HDMI output video device
Ethernet/HDBaseT
NOTE:
• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
• The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal)
• Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be
deteriorated as a result.
• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
154
Advertisement
Table of Contents
