General Operation; General Notes; Cleaning; Spare Parts - Calomax CASCADE-6TC Assembly, Installation And Operation Instructions

GENERAL OPERATION

Hold a cup below the tap or place large vessels on the drip
•
tray. Care must be taken to avoid injury through splashing
or over-filling.
To begin filling, pull the handle forward or push it backward
•
– hot water begins to flow. If the tap is opened fully it can
be locked open (for filling large vessels) in this state the
boiler must never be left unattended.
To stop filling, release the handle so it returns to the
•
closed position. NEVER PASS YOUR HAND BENEATH
THE NOZZLE.

GENERAL NOTES

Please retain these instructions for future reference
•
Ensure that a suitable drip tray is positioned below the tap
•
nozzle. This will help keep the surrounding work surfaces
and floor free from drips or splashes. Various options are
available and are outlined on the Accessories page of this
booklet .
All de-scaling and servicing must be performed by a
•
suitably qualified engineer.

CLEANING

Avoid using any abrasive materials. Wiping the
outer casing with a damp cloth should be sufficient.
Some stainless steel cleaning products may not be
suitable for plastic and must not come in contact with
the plastic fascia. Always disconnect the electrical
supply before cleaning.
The appliance must not be cleaned using a water
jet.
Page 8

SPARE PARTS

(Refer to centre pages for location).
1 2
KTT CBTCW
TAP TOP TAP CUP WASHER
ASSEMBLY
5 6
DOTTK CAS6TCPMFK
DRAW OFF TAP PLASTIC MOULDED
BODY FASCIA KIT
9 10
E3BRK CAP330
ELEMENT 3kW THERMISTOR
ASSEMBLY KIT
13 14
FIH CASLPK
WATER INLET LEVEL PROBES KIT
HOSE
NB: Not to scale.
3 4
CBTS CBTSS
TAP SPRING TAP SLOTTED
STEM
7 8
CAS6PCBT CASLPCBA
PRINTED CIRCUIT LIGHT PCB
BOARD Inc. TRIAC
11 12
X2
X2
CAS6SV CAS6BLG
SOLENOID VALVE BODY LID GASKET
15 16
NBPRG SPRSK
BODY LID SINGLE POLE
GROMMET ON/OFF SWITCH
(INC. COVERS)
Page 9