Lan Settings - CNET CWR-854 User Manual

- Operating Band: 802.11B/G, 802.11G or 802.11B
- Operating Mode: AP, Client, WDS, and AP+WDS.
Network type: when operating mode is "Client" mode, users can select the
-
network type as "infrastructure" or "Adhoc".
- SSID: The SSID differentiates one WLAN from another, therefore, all wireless
access points/routers and all wireless devices attempting to connect to a specific
WLAN must use the same SSID. It is case-sensitive and must not exceed 32
characters
- Channel Number: The number of channels supported depends on the region of
this Wireless-G Router. All stations communicating with this Wireless-G Router
must use the same channel. (Note: not supported in client mode)
- Enable Mac clone: when operating mode is "Client" mode and only one Ethernet
client exists, users can enable this Mac clone feature to connect with the wireless
station easily.
- Cancel: To skip the current settings and jump to the Setup Wizard page.
- Back: To skip the current settings and go back to the last page.
After all items are set, click on "Finished" button to save all the parameters you have set.

3.2 LAN Settings

"LAN Interface Setup" allows you to configure the parameters for local area network which
connects to the LAN port of your Wireless-G Router.
14