Dhcp Settings; Time Zone Settings - CNET CWR-854 User Manual

DHCP Server: Shows the DHCP server status.
-
MAC Address: Shows the MAC address on your LAN port.
-
WAN Configuration
Attain IP Protocol: Shows the IP protocol is being used on WAN.
-
IP Address: Shows the router's WAN port IP address
-
- Subnet Mask: Shows subnet mask on your public network.
- Default Gateway: Shows the defined Default Gateway on your public network.
MAC Address: Shows the MAC address on your WAN port.
-

3.8.2 DHCP Settings

There is a DHCP server running on LAN interface. It serves dynamic IP addresses to LAN hosts
running DHCP client. Both dynamic and static DHCP leases are supported. The service is turned
on by default.
Enable DHCP Server: Check the checkbox to enable the DHCP Server feature.
-
DHCP Client Range: Enter the Start / End address that should be assigned by the
-
DHCP server.
- Apply Changes: Click on "Apply Changes" to save the setting.
Reset: Click on "Reset" to undo your changes.
-
Refresh: Click on "Refresh" button to update the latest information in the Dynamic
-
DHCP Client List.
Help: To request help information.
-

3.8.3 Time Zone Settings

This wireless router provides a NTP (Network Time Protocol) client that can synchronize time with
configured NTP server. Press the Refresh Time button refreshes system timestamp and the
Save/Time Sync buttons force NTP client sync time with NTP server.
42