Lan Interface Setup - CNET CWR-500 User Manual

PPPoE: Enter the username and password you use when logging onto your ISP
through a PPPoE connection.
MAC address: It shows the MAC address of the WAN interface.
Clone MAC Address: Clone MAC address allows the user to copy the previous
MAC address and using it on your new network.

3.2 LAN interface setup

The user can configure the parameters for local area network which connects to the
LAN port of your Access Point. Here you may change the setting for IP address,
subnet mask, DHCP,etc..
MAC address: It shows the MAC address of the LAN interface.
IP address: The IP address of the LAN interface. The default IP address is
192.168.1.1.
Subnet Mask: The subnet mask of the LAN interface. The default subnet mask is
255.255.255.0.