CNET CWR-854 User Manual page 18

- WAN Access Type: select the PPPoE connection
- User Name: enter the User Name provided by your ISP
Password: enter the Password provided by your ISP
-
Connection Type: there are three connection type – continuous, connect on
-
demand and manual.
Continuous: the connection to the ISP is already connected.
Connect On Demand: the connection to the ISP is build only your
application is active to connect the Internet.
Manual: the connection to the ISP is build if you set manually.
Idle Time: active only if the connection type is selected to Connect On Demand.
-
The idle time value is defined the time of your application not accessing to the
Internet anymore. When the idle time is reached, the router will disconnect the
WAN port connection to your ISP.
MTU Size: MTU is the Maximum Transmission Unit. It specifies the largest packet
-
size permitted for Internet transmission. Keep the default setting, 1452, to have the
router select the best MTU for your Internet connection.
Attain DNS Automatically: enable to attain DNS from your ISP automatically.
-
- Set DNS Manually: allow user to set the DNS manually.
- DNS1: enter a specific DNS to this Primary field.
DNS2: enter this Secondary DNS if necessary.
-
DNS3: enter this Tertiary DNS if necessary.
-
Clone MAC Address: if your ISP blocked the MAC address of a network card, you
-
may use "Clone MAC Address to" duplicate the MAC address to the MAC address
18