CNET CWR-854 User Manual page 35

When you click on the Edit button, the VPN Setup window will display as below:
Enable Tunnel 1: Enable the IPSec VPN tunnel.
-
Connection Name: Specify a name for the VPN connection.
-
- Auth Type: Allow user to choice the method of authenticating gateways for
Diffie-Hellman key negotiation.
- Local Site: You can select the Single Address or Subnet Address for the
secured local IP.
Local IP Address/Network: Enter IP address for the local network for VPN
-
connection.
- Local Subnet Mask: Enter subnet mask the local network for VPN connection.
- Remote Site: You can select the Single Address, Subnet Address, Any
Address or NAT-T Any Address for the secured remote IP.
35