"Delete Selected" button.
Wireless Access Control Mode: There are three types of access control options:
-
Disable: disable this control feature.
Allow Listed: If you choose "Allow Listed", only those clients whose
wireless MAC addresses are in the access control list will be able to connect
to your Wireless-G Router.
Deny Listed: When "Deny Listed" is selected, these wireless clients on the
list will not be able to connect to the Wireless-G Router.
-
MAC Address: you need to fill out the client's MAC address which you want to
allow or deny.
-
Comment: you can add any comment in this blank.
Apply Changes button: when you fill up the MAC address and Comment, you
-
need to press this button then this information will be added to the Current Access
Control List..
-
Delete Selected button: delete the selected client.
-
Delete All button: delete all the WDS AP those are in the Current Access Control
List.
Reset button: to clear all the input in the blank.
-
Help: To request help information.
-
3.4.5 WDS
When you enable the WDS feature selected in the Basic Settings, this Wireless Distribution
System (WDS) feature will set this Wireless-G Router in "Bridge Mode". Two Wireless-G Routers
in bridge mode can communicate with each other through wireless interface. To do this, you must
29