Lan Interface Setup - CNET CQR-981 User Manual

4.1.2

LAN Interface Setup

This page is used to configure the parameters for local area network that connects to the LAN ports of
your router. Here you may change the setting for IP address, subnet mask, DHCP, etc.
Item
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Static DHCP
Device Name
802.1d Spanning Tree
The default IP address is 192.168.1.1
Please enter the Subnet Mask address
Please enter the Default Gateway address for LAN interface.
Click to select Disabled, Client or Server in different operation mode
of LAN access point.
Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP
address from the range
Configures how static DHCP address are assigned to client (only
available when DHCP server is enabled)
Configures the device name of the router.
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN. Select
enable or disable the IEEE 802.1d Spanning Tree function from
48
Description