Advertisement
Quick Links
4K/UHD HDMI Extender Kit with Control and Remote Power
AT-AVA-EX70C-KIT
The Atlona AT-AVA-EX70C-KIT is an Avance™ Series HDBaseT transmitter and receiver set
that supports control pass-through and remote power capability. The kit transmits 4K/UHD
60Hz 4:2:0 video up to 130 feet (40 meters) or 1080P 60Hz video up to 230 feet (70 meters). In
addition to video with embedded multi-channel audio, RS-232 and IR control signals, and remote
power from the transmitter to the receiver are supported on the single CAT6A/7 cable. Integrated
HDBaseT link status testing allows quick verification of cable, termination, and link quality. HDMI
clock stretching and EDID filtering are included to ensure the integrity of video transmission as
well as compatibility with the widest array of sources and display devices. Compact enclosures
and included brackets allow the transmitter and receiver endpoints to be surface mounted
in furniture or behind a display. The AT-AVA-EX70C-KIT delivers a cost-effective solution for
extension of video, audio, control, and receiver power at resolutions up to 4K/UHD.
Package Contents
1 x AT-AVA-EX70C-TX
1 x AT-AVA-EX70C-RX
1 x 2-pin captive screw connector
2 x 3-pin captive screw connector
1 x 4-pin captive screw connector
1 x 5-pin captive screw connector
IMPORTANT: Visit
updates and Installation Guide.
https://atlona.com/product/AT-AVA-EX70C-KIT
1
1 x IR emitter
4 x Mounting brackets
8 x Mounting screws
1 x 48V DC power supply
1 x IEC cable
1 x Installation Guide
Installation Guide
AT-AVA-EX70C-KIT
for the latest firmware
Advertisement
Related Manuals for Panduit Atlona Avance Series
Summary of Contents for Panduit Atlona Avance Series
- Page 1 Installation Guide AT-AVA-EX70C-KIT 4K/UHD HDMI Extender Kit with Control and Remote Power AT-AVA-EX70C-KIT The Atlona AT-AVA-EX70C-KIT is an Avance™ Series HDBaseT transmitter and receiver set that supports control pass-through and remote power capability. The kit transmits 4K/UHD 60Hz 4:2:0 video up to 130 feet (40 meters) or 1080P 60Hz video up to 230 feet (70 meters). In addition to video with embedded multi-channel audio, RS-232 and IR control signals, and remote power from the transmitter to the receiver are supported on the single CAT6A/7 cable.
- Page 2 Installation Guide AT-AVA-EX70C-KIT Panel Descriptions AT-AVA-EX70C-RX AT-AVA-EX70C-TX LINK TEST LINK RX TX RX TX DC 48V RS-232 IR IN IR OUT HDBaseT OUT HDMI IN RS-232 IR IN IR OUT HDBaseT IN HDMI OUT TEST HDMI IN Quick and easy test for category cables. Connect an HDMI cable from a source to Use the button to start the test and the this port.
- Page 3 Installation Guide AT-AVA-EX70C-RX AT-AVA-EX70C-TX AT-AVA-EX70C-KIT HDBaseT LED Descriptions LINK TEST LINK RX TX IR IN IR OUT RS-232 HDBaseT OUT IR IN IR OUT HDMI IN HDBaseT IN HDMI OUT Green LED Yellow LED When a category cable is connected This LED displays the status of the and receiving signal this LED will be HDBaseT firmware.
-
Page 4: Installation
Installation Guide AT-AVA-EX70C-KIT Two captive screw connectors for IR have been included. A 4-pin connector for the transmitter and a 3-pin connector for the receiver. IR IN is connected by a ground and signal wire. Use with 3rd party control systems. For easy termination, Atlona recommends using the 2 meter IR cable AT-LC- CS-IR-2M (purchasable through atlona.com) -
Page 5: Mounting Instructions
Installation Guide AT-AVA-EX70C-KIT Mounting Instructions The AT-AVA-EX70C-KIT includes two mounting brackets and four mounting screws each, which can be used to attach the units to any flat surface. Position one of the mounting brackets, as shown below, aligning the holes on Included screws the side of the enclosure with one set of holes on the mounting bracket. - Page 6 Installation Guide AT-AVA-EX70C-KIT Use the 18/2 AWG stranded wires to connect each extender into the wago splicers, ensuring that the same wire color is connected to each wago splicer. The colors are generally black/red, so it is best to connect the black wire to the ground/- port and splicer with the black wire from the power supply and use the red to connect to the power/+ port and the splicer with the white wire from the power supply.
-
Page 7: Updating Firmware
Installation Guide AT-AVA-EX70C-KIT TEST The transmitter has the ability to test the HDBaseT cable quality through the front panel. Press the test button on the front panel of the transmitter to start the test, the LED will display the testing results. AT-AVA-EX70C-TX TEST TEST... -
Page 8: Warranty
Installation Guide AT-AVA-EX70C-KIT Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-ava-ex70c-kit/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.