Summary of Contents for Panduit ATLONA AT-USB-EX100-KIT
Page 1
HDBaseT Extender Kit for USB 2.0 AT-USB-EX100-KIT The Atlona AT-USB-EX100-KIT is a long-distance extender kit for high speed USB signals. It supports transmission of USB 2.0 data up to 330 feet (100 meters) using a single, cost effective Category-type twisted pair cable. The AT-USB-EX100-KIT is ideal for popular conferencing applications such as Zoom®...
Page 2
Installation Guide AT-USB-EX100-KIT AT-USB-EX100-TX DEVIC DEVICE HOST Front AT-USB-EX100-TX DC 5V HDBaseT OUT DC 5V Rear DEVICE Connect up to two USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports provide 2.5 W per USB device interface. HOST Connect a USB cable from this port to the host computer.
Page 3
Installation Guide AT-USB-EX100-KIT AT-USB-EX100-RX DEVICE Front AT-USB-EX100-TX AT-USB-EX100-RX seT OUT DC 5V HDBaseT IN Rear DEVICE Connect up to four USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports provide 2.5 W per USB device interface. Connect a micro-USB to USB-A cable from this port, to a computer, to update the firmware. The PWR LED indicator will glow green when the AT-USB-EX100-RX is powered.
Installation Guide AT-USB-EX100-KIT AT-USB-EX100-TX AT-USB-EX100-RX Installation Connect up to two USB devices (speakerphone, etc.) to the DEVICE ports on the AT-USB- DC 5V HDBaseT OUT DC 5V HDBaseT IN EX100-TX. These ports provide 2.5 W per USB device interface. Connect a USB cable from the host device to the HOST port on the AT-USB-EX100-TX. AT-USB-EX100-RX Connect up to four USB devices (mouse, keyboard, etc.) to the DEVICE ports on the AT- USB-EX100-RX.
Installation Guide AT-USB-EX100-KIT LED Indicators The PWR indicator on both the AT-USB-EX100-TX and AT-USB-EX100-RX provide power state information on both the AT-USB-EX100-TX and AT-USB-EX100-RX. Description Solid green Unit is powered. Unit is not powered. • Verify that the locking connector is securely fastened to the power receptacle.
Page 6
Installation Guide AT-USB-EX100-KIT Position the mounting brackets, as shown below, aligning the holes on the side of the enclosure with the set of holes on the mounting bracket. Attach the screws from Step 1 to secure the top holes of the mounting bracket. V I C Repeat these steps to attach the mounting brackets to the other unit.
Page 7
Installation Guide AT-USB-EX100-KIT Atlona, Inc. (“Atlona”) Limited Product Warranty Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service. Under its Limited Product Warranty, Atlona, at its sole discretion, will either: •...
Page 8
Installation Guide AT-USB-EX100-KIT Remedy Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they purchased their products. Atlona can also be contacted directly. Visit www.atlona. com for Atlona’s contact information and hours of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer, reseller or end-purchaser is provided before Atlona extends its warranty services.
Page 9
Installation Guide AT-USB-EX100-KIT Exclusive Remedy To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are exclusive and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied. To the maximum extent permitted by law, Atlona specifically disclaims all implied warranties, including, without limitation, warranties of merchantability and fitness for a particular purpose.