Advertisement
Quick Links
4K/UHD HDMI Over HDBaseT TX/RX Kit
AT-AVA-EX70-2PS-KIT
The Atlona AT-AVA-EX70-2PS-KIT is an HDBaseT transmitter/receiver kit in the Avance™ Series,
for video up to 4K/UHD 60Hz 4:2:0 and HDMI data rates up to 10 Gbps. The AVA-EX70-2PS-KIT
is HDCP 2.2 compliant and provides HDMI transmission up to 230 feet (70 meters) for 1080p
video, and up to 130 feet (40 meters) for 4K/UHD over CAT6a/7 cable. This extender kit features
integrated HDBaseT link status testing for quick verification of twisted pair cabling integrity, as
well as HDMI clock stretching, EDID filtering, and HDMI signal regeneration for legacy HDMI
source devices. The AVA-EX70-2PS-KIT delivers a cost-effective solution for HDMI extension,
with locally powered transmitter and receiver endpoints as well as surface mounting hardware for
discreet installation.
Package Contents
1 x AT-AVA-EX70-2PS-TX
1 x AT-AVA-EX70-2PS-RX
4 x Mounting brackets
8 x Mounting screws
IMPORTANT: Visit
firmware updates and Installation Guide.
https://atlona.com/product/AT-AVA-EX70-2PS-KIT
2 x 5V DC power supply
2 x IEC cable
1 x Installation Guide
1
Installation Guide
AT-AVA-EX70-2PS-KIT
for the latest
Advertisement
Related Manuals for Panduit ATLONA AT-AVA-EX70-2PS-KIT
Summary of Contents for Panduit ATLONA AT-AVA-EX70-2PS-KIT
- Page 1 4K/UHD HDMI Over HDBaseT TX/RX Kit AT-AVA-EX70-2PS-KIT The Atlona AT-AVA-EX70-2PS-KIT is an HDBaseT transmitter/receiver kit in the Avance™ Series, for video up to 4K/UHD 60Hz 4:2:0 and HDMI data rates up to 10 Gbps. The AVA-EX70-2PS-KIT is HDCP 2.2 compliant and provides HDMI transmission up to 230 feet (70 meters) for 1080p video, and up to 130 feet (40 meters) for 4K/UHD over CAT6a/7 cable.
- Page 2 Installation Guide AT-AVA-EX70-2PS-KIT Panel Descriptions AT-AVA-EX70-2PS-RX AT-AVA-EX70-2PS-TX LINK TEST LINK DC 5V HDBaseT IN HDMI OUT DC 5V HDBaseT OUT HDMI IN TEST Quick and easy test for category cables. Not used at this time. Use the button to start the test and the POWER and LINK LEDs LED to determine pass or fail.
-
Page 3: Mounting Instructions
Installation Guide AT-AVA-EX70-2PS-KIT Mounting Instructions The AT-AVA-EX70-2PS-KIT includes two mounting brackets and four mounting screws each, which can be used to attach the units to any flat surface. Position one of the mounting brackets, as shown below, aligning the holes on Included screws the side of the enclosure with one set of holes on the mounting bracket. - Page 4 Installation Guide AT-AVA-EX70-2PS-KIT Cable Recommendation Guidelines Refer to the tables below for recommended cabling when using Altona products with HDBaseT. The green bars indicate the signal quality when using each type of cable. Higher-quality signals are represented by more bars. Core Shielding CAT5e...
-
Page 5: Updating Firmware
Installation Guide AT-AVA-EX70-2PS-KIT Updating Firmware Download the firmware .zip file from the firmware tab located at https://atlona.com/product/ AT-AVA-EX70-2PS-KIT. Unzip the .bin file to an easy to locate area of the local PC. Connect the transmitter’s FW micro USB port to a PC using a micro USB to USB A cable (purchased separately). - Page 6 Installation Guide AT-AVA-EX70-2PS-KIT Notes...
- Page 7 Installation Guide AT-AVA-EX70-2PS-KIT Notes...
-
Page 8: Warranty
Installation Guide AT-AVA-EX70-2PS-KIT Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-ava-ex70-2ps-kit/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.